95 5 jst 1 the xh connector was developed based on the high reliability and versatility of our nh series connectors. the connector is very small with a mounting height of 9.8mm (.386"). yet it meets the needs for high-density mounting and miniaturization of electronic equipment, including vcrs, radio-cassette players, and car stereo systems. features ?original folded beam contact the protected, folded beam contact in this connector provides high contact pressure with an over-stress stop feature. this ensures dependable continuity when used with low voltage, low current carrying circuits (dry circuits). the wire crimp section is mechanically decoupled from the post insertion section which, in turn, prevents the mating area from being adversely affected by crimping. ?box-shaped shrouded header the four-sided, box-shaped shroud prevents the receptacle from being misinserted or pried during insertion and removal. the shroud also prevents foreign matter from reaching the posts and resists contact deformation due to handling and shipping. furthermore, a serrated, oversized square post is pressure-fit into each square hole to completely protect the post against heat and to prevent flux from entering during dip soldering. ?header with a boss this header has a boss (projection) on the bottom of the housing to prevent improper insertion in printed circuit boards. ?interchangeability this header is interchangeable with those of 2.5mm (.098") pitch insulation displacement nr and nrd connectors and board-to-board jq connectors. ?conforming to the ha terminal the 4-circuit xh connector conforms to the ha terminal specified in jem 1427 (japanese electric machine industry association standards). specifications current rating: 3a ac, dc (awg#22) voltage rating: 250v ac, dc temperature range: -25 ? c to +85 ? c (including temperature rise in applying electrical current) contact resistance: initial value/10m ? max. after environmental testing/20m ? max. insulation resistance: 1,000m ? min. withstanding voltage: 1,000v ac/minute applicable wire: awg #30 to #22 applicable pc board thickness: 1.6mm(.063") * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 2 j50014297 xh connector disconnectable crimp style connectors 2.5mm (.098") pitch crimp radial tape emboss tape
96 96 96 xh connector contact material and finish model no. applicable wire q'ty / reel mm 2 awg# insulation o.d mm(in.) phosphor bronze, tin-plated sxh-001t-p0.6n sxh-001t-p0.6 sxh-002t-p0.6 0.13 to 0.33 0.08 to 0.33 0.05 to 0.13 26 to 22 28 to 22 30 to 26 1.3 to 1.9 (.051 to .075) 1.2 to 1.9 (.047 to .075) 0.9 to 1.3 (.035 to .051) 5,000 8,000 shape a b housing circuits model no. dimensions mm(in.) q ' ty / bag ac material nylon 6, ul94v-0, natural (white) b 1 2 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16 20 xhp- 1 xhp- 2 xhp- 2(10.0)-u xhp- 3 xhp- 4 xhp- 5 xhp- 6 xhp- 6(5.0)-u xhp- 7 xhp- 8 xhp- 9 xhp-10 xhp-11 xhp-12 xhp-13 xhp-14 xhp-15 xhp-16 xhp-20 2.5(.098) 10.0(.394) 5.0(.197) 7.5(.295) 10.0(.394) 12.5(.492) 25.0(.984) 15.0(.591) 17.5(.689) 20.0(.787) 22.5(.886) 25.0(.984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 37.5(1.476) 47.5(1.870) 3.2( .126) 5.7( .224) 13.2( .520) 8.2( .323) 10.7( .421) 13.2( .520) 15.7( .618) 28.2(1.110) 18.2( .717) 20.7( .815) 23.2( .913) 25.7(1.012) 28.2(1.110) 30.7(1.209) 33.2(1.307) 35.7(1.406) 38.2(1.504) 40.7(1.602) 50.7(1.996) 4.8( .189) 7.3( .287) 14.8( .583) 9.8( .386) 12.3( .484) 14.8( .583) 17.3( .681) 29.8(1.173) 19.8( .780) 22.3( .878) 24.8( .976) 27.3(1.075) 29.8(1.173) 32.3(1.272) 34.8(1.370) 37.3(1.469) 39.8(1.567) 42.3(1.665) 52.3(2.059) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 note: 1. contact jst if you require gold-plated contacts or contacts made of brass. 2. contact jst also if you require shielded wires, thin wires or other special wires. 3. sxh-001t-p0.6n is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. note: 1. xhp-2(10.0)-u is 2 circuits 10.0mm(.394") pitch plugged up. not ul/csa/tu v approved. 2. xhp-6(5.0)-u is 6 circuits 5.0mm(.197") pitch plugged up. not ul/csa/tu v approved. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. xhp-1-oo - (blank)?atural (white) bk?lack r?ed e?lue y?ellow l?emon yellow m?reen d?range n?rown fy?ivid yellow ex. xhp-2(10.0)-u-oo - (blank)?atural (white) r?ed e?lue 1.8(.071) 1.6(.063) 6.5(.256) 2.35(.093) 1.95(.077) 2.4(.094) 6.5(.256) 2.0(.079) shape a shape b plugged up (2 circuits 10.0mm(.394") pitch) (6 circuits 5.0mm(.197") pitch) 7.75(.305) 4.1(.161) 5.7(.224) 2.5 (.098) a b c circuit no.1 mark 7.75(.305) 4.1(.161) 5.7(.224) circuit no.1 mark a b c 7.75(.305) 4.1(.161) 5.7(.224) circuit no.1 mark a b c
97 through-hole type shrouded header h jst 10.0(.394) 14.9(.587) [2.35 (.093)] 5.75(.226) jst a b 5.75(.226) 7.0(.276) 0.64(.025) 3.4 (.134) 2.45 (.096) (.093)] [2.35 jst 8 a b 5.75(.226) 7.0(.276) 3.4 (.134) 7.0(.276) 3.4 (.134) 2.45 (.096) 2.5 (.098) (.093)] [2.35 0.64(.025) 0.64(.025) jst 8 [6.1(.240)] 7.0(.276) a b 2.45 (.096) 2.5 (.098) 3.4 (.134) 11.5(.453) s( )b-xh-a-1: 7.6(.299) s( )b-xh-a: 9.2(.362) 0.64(.025) 2.45 (.096) material and finish dimensions mm(in.) ab top entry type side entry type q'ty / box circuits model no. top entry type side entry type b 2b-xh-a b2 (10.0)b-xh-a-u b 3b-xh-a b 4b-xh-a b 5b-xh-a b 6b-xh-a b 7b-xh-a b 8b-xh-a b 9b-xh-a b10b-xh-a b11b-xh-a b12b-xh-a b13b-xh-a b14b-xh-a b15b-xh-a b16b-xh-a b20b-xh-a 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 2.5( .098) 10.0( .394) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 37.5(1.476) 47.5(1.870) 7.4( .291) 14.9( .587) 9.9( .390) 12.4( .488) 14.9( .587) 17.4( .685) 19.9( .783) 22.4( .882) 24.9( .980) 27.4(1.079) 29.9(1.177) 32.4(1.276) 34.9(1.374) 37.4(1.472) 39.9(1.571) 42.4(1.669) 52.4(2.063) 1,000 1,000 1,000 500 500 500 500 500 500 250 250 250 250 250 250 200 100 1,000 1,000 1,000 500 500 500 250 250 250 250 250 200 200 200 100 100 ? ? s 3b-xh-a-1 s 4b-xh-a-1 s 5b-xh-a-1 s 6b-xh-a-1 s 7b-xh-a-1 s 8b-xh-a-1 s 9b-xh-a-1 s10b-xh-a-1 s11b-xh-a-1 s12b-xh-a-1 s13b-xh-a-1 s14b-xh-a-1 s15b-xh-a-1 ? ? post: brass, copper-undercoated, tin/lead-plated wafer: nylon 66, ul94v-0, natural (white) s 2b-xh-a ? s 3b-xh-a s 4b-xh-a s 5b-xh-a s 6b-xh-a s 7b-xh-a s 8b-xh-a s 9b-xh-a s10b-xh-a s11b-xh-a s12b-xh-a s13b-xh-a s14b-xh-a s15b-xh-a s16b-xh-a ? the shrouded headers are interchangeable with those of the br, nr and nrd insulation displacement connectors, and jq board-to-b oard connectors. top entry type side entry type (2 circuits) top entry type (plugged up) (3 to 20 circuits) xh connector note: b2(10.0)b-xh-a-u is 2 circuits 10.0mm(.394") pitch plugged up. not ul/csa/tu v approved. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. s3b-xh-a(-1)-oo - (blank)?atural (white) bk?lack r?ed e?lue y?ellow l?emon yellow m?reen d?range n?rown fy?ivid yellow
98 98 98 xh connector through-hole type shrounded header b a 2.45(.096) 7.0 (.276) 3.4 (.134) 0.64(.025) 5.75(.226) 6.75(.266) 2.5 (.098) 2.45 (.096) a b 0.64(.025) 7.0 (.276) 3.4 (.134) 5.75 (.226) 6.75(.266) h jst 6 2.5 (.098) 2.45 (.096) a b 0.64(.025) 7.0 (.276) 3.4 (.134) 5.75 (.226) h jst 12 circuits model no. dimensions mm(in.) q ' ty / box ab 2 3 4 5 6 7 8 9 10 11 12 13 14 15 b 2b-xh-2 b 3b-xh-2 b 4b-xh-2 b 5b-xh-2 b 6b-xh-2 b 7b-xh-2 b 8b-xh-2 b 9b-xh-2 b10b-xh-2 b11b-xh-2 b12b-xh-2 b13b-xh-2 b14b-xh-2 b15b-xh-2 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 7.4( .291) 9.9( .390) 12.4( .488) 14.9( .587) 17.4( .685) 19.9( .783) 22.4( .882) 24.9( .980) 27.4(1.079) 29.9(1.177) 32.4(1.276) 34.9(1.374) 37.4(1.472) 39.9(1.571) 1,000 1,000 500 500 500 500 250 250 250 250 250 250 250 250 material and finish post: brass, copper-undercoated, tin/lead-plated wafer: glass-filled nylon 66, ul94v-0, natural (ivory) (9 to 15 circuits) top entry type of glass-filled nylon (2 circuits) (3 to 8 circuits) as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b2b-xh-2-oo - (blank)?atural (ivory) c?lack r?ed e?lue y?ellow m?reen
99 xh connector jst a b 7.0(.276) 0.64(.025) 3.4 (.134) 2.45 (.096) 1.6 (.063) 1.5(.059) 5.75(.226 ) 1.0 (.039)dia. (.079) 2.0 jst 5.75(.226) 1.5(.059) a b (.025) 0.64 (.063) 2.5 (.098) 1.6 (.079) 2.0 1.0 (.039)dia. h jst 0.64(.025) 7.0(.276) 4.9(.193) 5.75(.226) 4.35(.171) 1.5(.059) [2.35(.093)] [2.35(.093)] 2.7(.106) 3.4 (.134) 7.0(.276) 3.4 (.134) 2.45(.096) circuits model no. dimensions mm(in.) ab q'ty / box material and finish 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 27.5(1.083) b 1b-xh-am b 2b-xh-am b 3b-xh-am b 4b-xh-am b 5b-xh-am b 6b-xh-am b 7b-xh-am b 8b-xh-am b 9b-xh-am b10b-xh-am b12b-xh-am 7.4( .291) 9.9( .390) 12.4( .488) 14.9( .587) 17.4( .685) 19.9( .783) 22.4( .882) 24.9( .980) 27.4(1.079) 32.4(1.276) 1,000 1,000 1,000 500 500 500 500 250 250 250 250 1 2 3 4 5 6 7 8 9 10 12 post: brass, copper-undercoated, tin/lead-plated wafer: nylon 66, ul94v-0, natural (white) ?? through-hole type shrouded header top entry type with a boss (2 circuits) (1 circuit) (3 to 12 circuits) the shrouded headers are interchangeable with those of the nr, nrd and br insulation displacement connectors, and jq board-to-b oard connectors. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b1b-xh-am-oo - (blank)?atural (white) bk?lack r?ed e?lue y?ellow l?emon yellow m?reen note: b1b-xh-am is not ul/csa/tu v approved.
100 xh connector 2 and 3 circuits: 12.7(.500) 4 to 8 circuits: 25.4(1.000) 12.7(.500) 20.0(.787) 9.0(.354) 6.0 (.236) 18.0 (.709) 4.0(.157)dia. 6.75(.266) 2 circuits: 5.1(.201) 3 to 8circuits: 3.85(.152) 2 circuits: 2.5(.098) 3 to 8circuits: 5.0(.197) note: conforms to jis c 0806. taping specification of through-hole type shrouded header through-hole type shrouded header on radial-tape 7.4(.291) 0.64 (.025) 2.45 (.096) 6.75(.266) [0.7(.028)dia.] 2.5 (.098) 7.0(.276) 2.5 (.098) b a 2.45 (.096) 7.0(.276) 2.8 (.110) 0.64 (.025) 6.75(.266) [0.7(.028)dia.] b a 2.45 (.096) 2.5 (.098) 0.64 (.025) 2.8 (.110) 7.0(.276) [0.7(.028)dia.] 6.75(.266) circuits model no. 2 3 4 5 6 7 8 b3b-xh-tv4 b4b-xh-tv4 5.0(.197) 7.5(.295) 10.0(.394) 12.5(.492) 15.0(.591) 17.5(.689) 9.9(.390) 12.4(.488) 14.9(.587) 17.4(.685) 19.9(.783) 22.4(.882) material and finish post: copper alloy, copper-undercoated, tin/lead-plated wafer: tv4 type/ nylon 66, ul94v-0 2-tv4 type/ glass-filled nylon 66, ul94v-0 b a dimensions mm(in.) ab b2b-xh-2-tv4 b3b-xh-2-tv4 b4b-xh-2-tv4 b5b-xh-2-tv4 b6b-xh-2-tv4 b7b-xh-2-tv4 b8b-xh-2-tv4 q'ty / box 1,000 1,000 500 500 500 500 500 tv4 type 2-tv4 type 2-tv4 type (3 to 4 circuits) (3 to 8 circuits) (2 circuits) as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b2b-xh-2-tv4-oo - (blank)?atural (ivory) c?lack (glass-filled) bk?lack r?ed e?lue y?ellow m?reen
101 xh connector 9.8(.386) 2.5 0.05 (.098 .002) [2.5 (.098) min. ] 3.4 (.134) min. (.226) 5.75 (.276) 7.0 +0.1 0 +.004 0 3 to 20 circuits:0.9 (.035 )dia. 2 circuits:1.0 0.05(.039 .002)dia. +0.05 0 +.002 0 3 to 20 circuits:0.95 (.037 )dia. 2 circuits:1.0 0.05(.039 .002)dia. 14.3(.563) 11.5(.453) (.240) 6.1 2.5 0.05 (.098 .002) [2.5 (.098) min. ] 0.9 +0.1 (.035 + .004 )dia. [9.2 (.362) min.] 0 0 9.8(.386) 3.4 (.134) min. (.226) 5.75 (.276) 7.0 2.5 0.05 (.098 .002) 2.5 (.098) min. 1.6 0.05 (.063 .002) 2.0 0.05 (.079 .002) 1.1 (.043 )dia. +0.1 0 +.004 0 3 to 20 circuits:0.9 (.035 )dia. 2 circuits:1.0 0.05(.039 .002)dia. +0.2 0 +.008 0 1.7 (.067 )dia. +0.1 0 +.004 0 0.9 (.035 )dia. +0.1 0 +.004 0 4.35 0.05 (.171 .002)dia. through-hole type pc board layout (viewed from soldering side) and assembly layout note: 1. tolerances are non-cumulative: 0.05mm( .002" ) for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. if printed circuit boards made of hard materia l are used, the hole dimensions should be larger. the dimensions above should serve as a guideline. contact jst for details. top entry type side entry type top entry type with a boss lead tape tail tape terminals & connectors r d h w flat pack (zig zag folded) 24 indexing holes perfold (304.8mm/12") (316x45x330mm)12.4"(w)x1.8"(d)x13.0"(h) 19.05mm(.750") package type distance between folds box size distance between the end of the tape and the first connector's center line (either end) distance between the end of the tape and the first connector's center line (either end) products of different packaging specifications are also available. contact jst for details. packaging specifications of through-hole type shrouded header (1 circuit or more) (2 circuits or more)
102 xh connector 6.0(.236) 5.5(.217) 2.5(.098) b a 3.75(.148) 0.64 (.025) 7.0(.276) [3.6(.142)] circuits model no. dimensions mm(in.) ab q'ty / reel material and finish 5.0(.197) 7.5(.295) 12.5(.492) S3B-XH-SM3-TB s4b-xh-sm3-tb s6b-xh-sm3-tb 12.5(.492) 15.0(.591) 20.0(.787) 500 500 500 3 4 6 pin: copper alloy, copper-undercoated, tin/lead-plated wafer: nylon 46, ul94v-0, natural (white) solder tab: brass, copper-undercoated, tin/lead-plated smt type shrouded header note: the products listed above are supplied on embossed-tape. taping specifications of smt type shrouded header feeding direction ( + .098 - .039 [13(.512)dia.] w1 + 2.5 - 1.0 ) 330 2.0(12.992 .079)dia. 2.0 0.5 (.079 .020) f 0.1 (.004) w 0.3(.012) s 4.0 0.1 (.157 .004) 16.0 0.1 (.630 .004) 1.75 0.1 (.069 .004) 2.0 0.1 (.079 .004) 1.55 0.05 (.061 .002)dia. cover tape carrier tape feeding direction 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) 1.55 0.05 (.061 .002)dia. feeding direction 16.0 0.1 (.630 .004) f 0.1 (.004) w 0.3(.012) 1.75 0.1 (.069 .004) s 0.1(.004) cover tape carrier tape feeding direction cover tape leader carrier tape the end part 160(6.299)min. connector mounting part 400(15.748)min. leader part 100(3.937)min. (3 to 4 circuits) (6 circuits) circuits taping dimensions mm(in.) fsw reel dimen- sions mm(in.) w1 q'ty / reel 3, 4 6 11.5(.453) 14.2(.559) 28.4 (1.118) 24.0( .945) 32.0(1.260) 25.5(1.004) 33.5(1.319) 500 500 note: 1. specifications conform to jis c 0806. the tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. s3b-xh-sm3-oo -tb - (blank)?atural (white) m?reen r?ed e?lue l?emon yellow
103 smt type pc board layout (viewed from component side) 2.5(.098) 0.2 (.008) 3.9 (.154) 11.0(.433) 6.5(.256) 1.8 (.071) 2.3 (.091) 1.3(.051) end face of wafer on the mating side note: 1. tolerances are non-cumulative: 0.05mm( .002" ) for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. xh connector contact crimp applicator mks-l compact crimp applicator mks-ls strip-crimp applicator mks-sc with safety cover without safety cover with safety cover without safety cover with safety cover applicator for the semi-automatic press ap-k2n sxh-001t-p0.6n aplmk sxh001-06n aplnc sxh001-06n aplmkls sxh001-06n apllsnc sxh001-06n aplsc sxh001-06n sxh-001t-p0.6 aplmk sxh001-06 aplnc sxh001-06 aplmkls sxh001-06 apllsnc sxh001-06 aplsc sxh001-06 sxh-002t-p0.6 aplmk sxh002-06 aplnc sxh002-06 aplmkls sxh002-06 apllsnc sxh002-06 aplsc sxh002-06
|
